A pre-engineered 30"H × 24"W × 12"D NEMA 1/3R/4/12 carbon-steel control panel built around the Siemens S7-1500F safety CPU, with a deeper 12-inch back-pan for larger components and extra wiring room. Every panel is fully wired, labeled, and function-tested before it ships — and backed by complete documentation so your team can maintain it for years.

Specifications

• Dimensions (H × W × D): 30"H x 24"W x 12"D

• Enclosure: NEMA 1/3R/4/12 carbon-steel — Rittal

• PLC / CPU: Siemens 6ES7511-1FL03-0AB0

• Standard on-board I/O: 16 inputs / 16 outputs

• Control voltage: 24 VDC

• Documentation: Electrical Prints | 2D CAD | Bill of Materials

• Lead time: 3-5 Weeks

What’s included

• 30"H × 24"W × 12"D Rittal NEMA 1/3R/4/12 carbon-steel enclosure

• Siemens S7-1500F (6ES7511-1FL03-0AB0) safety CPU with modular S7-1500 I/O

• 24 VDC power supply

• Main disconnect with door interlock

• Circuit breakers and control-power protection

• Incoming & control-voltage terminal blocks with dedicated ground blocks

• DIN rail, wire duct, and fully labeled point-to-point wiring

• Complete electrical prints, 2D CAD drawings and bill of materials

Design · Build · Integrate · Support — right solution, right price, right time.

Typical lead time: 3-5 Weeks.

Bill of Materials

• 1× 30"H x 24"W x 12"D NEMA 1/3R/4/12 carbon-steel enclosure — Rittal WM302412NC

• 1× Siemens 6ES7511-1FL03-0AB0 CPU

• 1× Siemens 6ES7590-1AB60-0AA0 — Mounting rail/base

• 1× Siemens 6ES7521-1BH00-0AB0 — 16-pt digital input

• 1× Siemens 6ES7522-1BH01-0AB0 — 16-pt digital output

• 1× 8-port industrial Fast Ethernet switch — Trendnet TI-ELC80

• 1× 24 VDC power supply — Wago 2587-2146

• Rotary disconnect — operator, shaft & switch (Socomec)

• 1× 15A, 277 VAC/48 VDC, 1-pole, C curve — Eaton FAZ-C15-1-SP

• 1× 5A, 277 VAC/48 VDC, 1-pole, B curve — Eaton FAZ-B5-1-SP

• 1× 10A, 277 VAC/48 VDC, 1-pole, B curve — Eaton FAZ-B10-1-SP

• 1× 6A, 277 VAC/48 VDC, 1-pole, C curve — Eaton FAZ-C6-1-SP

• 12× Feed-through terminal blocks — Wago 2202-1401

• 2× Ground terminal blocks — Wago 2202-1407

• 32× Double-deck I/O terminal blocks — Wago 2202-2701

• 16× Terminal-block end plates & accessories — Wago

• 35mm DIN mounting rail (as required)

• Slotted wire duct — Iboco T1E-1540G-1 (as required)

• Hook-up wire (18 AWG) (as required)

• Wire / component labels (as required)