A pre-engineered 48"H × 36"W × 10"D NEMA 1/3R/4/12 carbon-steel control panel built around the Mitsubishi iQ-F FX5U-64MR/DS CPU, with a large-format footprint with room for high I/O counts and future expansion. Every panel is fully wired, labeled, and function-tested before it ships — and backed by complete documentation so your team can maintain it for years.

Specifications

• Dimensions (H × W × D): 48"H x 36"W x 10"D

• Enclosure: NEMA 1/3R/4/12 carbon-steel — Rittal

• PLC / CPU: Mitsubishi FX5U-64MR/DS

• Standard on-board I/O: 32 inputs / 32 outputs

• Control voltage: 24 VDC

• Documentation: Electrical Prints | 2D CAD | Bill of Materials

• Lead time: 2-4 Weeks

What’s included

• 48"H × 36"W × 10"D Rittal NEMA 1/3R/4/12 carbon-steel enclosure

• Mitsubishi iQ-F FX5U-64MR/DS CPU — 64 built-in I/O points

• 24 VDC power supply

• Main disconnect with door interlock

• Circuit breakers and control-power protection

• Incoming & control-voltage terminal blocks with dedicated ground blocks

• DIN rail, wire duct, and fully labeled point-to-point wiring

• Complete electrical prints, 2D CAD drawings and bill of materials

Design · Build · Integrate · Support — right solution, right price, right time.

Typical lead time: 2-4 Weeks.

Bill of Materials

• 1× 48"H x 36"W x 10"D NEMA 1/3R/4/12 carbon-steel enclosure — Rittal WM483610NC

• 1× Mitsubishi FX5U-64MR/DS CPU

• 1× 8-port industrial Fast Ethernet switch — Trendnet TI-ELC80

• 1× 24 VDC power supply — Wago 2587-2146

• Rotary disconnect — operator, shaft & switch (Socomec)

• 1× 15A, 277 VAC/48 VDC, 1-pole, C curve — Eaton FAZ-C15-1-SP

• 1× 5A, 277 VAC/48 VDC, 1-pole, B curve — Eaton FAZ-B5-1-SP

• 1× 10A, 277 VAC/48 VDC, 1-pole, B curve — Eaton FAZ-B10-1-SP

• 1× 6A, 277 VAC/48 VDC, 1-pole, C curve — Eaton FAZ-C6-1-SP

• 12× Feed-through terminal blocks — Wago 2202-1401

• 2× Ground terminal blocks — Wago 2202-1407

• 32× Double-deck I/O terminal blocks — Wago 2202-2701

• 16× Terminal-block end plates & accessories — Wago

• 35mm DIN mounting rail (as required)

• Slotted wire duct — Iboco T1E-1540G-1 (as required)

• Hook-up wire (18 AWG) (as required)

• Wire / component labels (as required)